first image

Add Note Edit Step 10 — Bluetooth Antenna  ¶ 

  • Remove the single silver Phillips screw from the black plastic framework directly below the Bluetooth antenna board.

first image

Add Note Edit Step 11  ¶ 

  • Remove the yellow tape securing the Bluetooth antenna cable to the black plastic framework.

  • Deroute the Bluetooth antenna cable.

  • Lift the silver Bluetooth antenna board out of its slot.

Next » « Previous

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Mac mini (PowerPC) device page.

Did you successfully follow this guide?

This guide has been completed 1 time.

Comments Add Note Comments are offturn on