Installing Mac Mini Mid 2010 Speaker

Replace a blown-out speaker.

  • Add Note x

Use this guide to replace your mini's speaker. Replacing the speaker requires removal of the logic board.

Sections
Tools
first image
thumb image 1
thumb image 2

Add Note Edit Step 1 — Bottom Cover  ¶ 

  • Place your thumbs in the depressions cut into the bottom cover.

  • Rotate the bottom cover counter-clockwise until the white dot painted on the bottom cover is aligned with the ring inscribed on the outer case.

first image

Add Note Edit Step 2  ¶ 

  • Tilt the mini enough to allow the bottom cover to fall away from the outer case.

  • Remove the bottom cover and set it aside.

first image

Add Note Edit Step 3 — Fan  ¶ 

  • Remove the two 11.3 mm T6 Torx screws securing the fan to the logic board near the antenna plate.

Next » « Previous

Comments Add Note Comments are offturn on