first image
thumb image 1
thumb image 2

Add Note Edit Step 13 — RAM  ¶ 

  • Simultaneously pull the tabs on each side of the RAM chip away from the center of the chip. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

  • Pull the RAM chip directly out from its connector.

  • If there are two RAM chips installed, repeat the above procedure for the second chip.

Next » « Previous

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Mac mini Model A1283 device page.

Did you successfully follow this guide?

This guide has been completed 120 times.

Comments Add Note Comments are offturn on