first image

Add Note Edit Step 19  ¶ 

  • Use a spudger to lift the free end of the logic board off the bottom housing near the PRAM battery.

first image

Add Note Edit Step 20  ¶ 

  • While slightly lifting the free end of the board pull it away from the port side of the mini, minding any edges that may get caught.

first image

Add Note Edit Step 21 — Bottom Housing  ¶ 

  • Remove the single Phillips screw between the headphone and microphone jacks on the audio board.

Next » « Previous

Comments Add Note Comments are offturn on