first image
thumb image 1
thumb image 2

Add Note Edit Step 13  ¶ 

  • Remove the Phillips screw near the audio ports securing the internal frame to the bottom case.

first image
thumb image 1
thumb image 2

Add Note Edit Step 14  ¶ 

  • Gently lift the internal frame up from the bottom housing, minding the AirPort antenna and any other cables that may get caught.

  • It may be necessary to pull up near the interconnect board to separate it from the logic board.

first image

Add Note Edit Step 15 — Hard Drive  ¶ 

  • Remove the two Phillips screws securing the side of the hard drive to the internal frame.

Next » « Previous

Comments Add Note Comments are offturn on