Installing Dell Inspiron 8600 Keyboard

Improper Action

Improper Action

This guide contains images that improperly convey how to perform a specific action.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by iFixit staff.

Incorrect Tools

Incorrect Tools

This guide contains steps that use incorrect tools in images and/or text.

To replace the keyboard, follow this guide

  • Author: Perry
  • Time required: 5 minutes
  • Difficulty: Moderate
  • Add Note x

If you are having difficulties with the keyboard, please follow this guide.

Sections
Tools
first image

Add Note Edit Step 1 — Battery  ¶ 

first image
thumb image 1
thumb image 2
thumb image 3

Add Note Edit Step 2 — Hinge Cover  ¶ 

  • Insert a spludger into the notch at the far left side of the top blue panel and pry hinge cover off.

  • Note: You may need to pry the other side off by inserting the spludger between the hinge and the top cover.

  • Be careful of wire attached to underside of the hinge cover.

first image

Add Note Edit Step 3  ¶ 

  • Pull the small black tab on the right hand side of the laptop.

  • The hinge cover has now been removed.

first image
thumb image 1
thumb image 2
thumb image 3

Add Note Edit Step 4 — Keyboard  ¶ 

  • Remove the screws at the top of the keyboard as indicated indicated.

  • Do not just lift up, there is a tab underneath the keyboard that is still connected to the mother board.

  • You will need to pull out the white tab underneath the keyboard upwards until it pops out of its socket.

  • The keyboard should be easily removable at this point.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Dell Inspiron 8600 device page.

Did you successfully follow this guide?

This guide has been completed 1 time.

Comments Add Note Comments are offturn on