Installing Chumby One Rear Cover

User-Contributed Guide

User-Contributed Guide

This guide is not managed by iFixit staff.

  • Author: Student Jones
  • Time required: 10 minutes
  • Difficulty: Easy
  • Add Note x

Use this guide to remove the Chumby One's rear cover.

Tools
first image
thumb image 1
thumb image 2

Add Note Edit Step 1 — Rear Cover  ¶ 

  • Be careful when taking apart this device.

  • Use a spudger to remove the plastic feet.

  • Unscrew the four Phillips screws using a #00 Phillips screwdriver.

first image
thumb image 1
thumb image 2

Add Note Edit Step 2  ¶ 

  • Remove the rear cover from the device.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Chumby One device page.

Did you successfully follow this guide?

This guide has been completed 1 time.

Comments Add Note Comments are offturn on