Image #1

Add Note Edit Step 9  ¶ 

  • Rotate the upper case up and toward the screen, so that the upper case rests against it.

Image #1

Add Note Edit Step 10  ¶ 

  • Remove the orange tape securing the trackpad ribbon to the logic board.

  • Disconnect the trackpad ribbon from the logic board.

  • Remove the upper case from the computer.

Image #1

Add Note Edit Step 11 — PRAM Battery  ¶ 

  • Use a spudger to pry up the PRAM battery from the optical drive.

Image #1

Add Note Edit Step 12  ¶ 

  • Disconnect the PRAM battery cable from the logic board and pull the PRAM battery out, removing tape as necessary.

Next » « Previous

Required Tools

Spudger

$2.95 · 50+ In stock

T6 Torx Screwdriver

$4.95 · 18 In stock

Phillips #00 Screwdriver

$4.95 · 50+ In stock

Coin

$2.95 · 19 In stock

Recommended Tools

Universal Drive Adapter

$29.95 · 50+ In stock

Inspection Scope

$39.95 · 17 In stock

Portable Anti-Static Mat

$24.95 · 11 In stock

Comments Add Note Comments are offturn on