Installing PlayStation 3 Slim Top Cover

Remove the top cover to access your PlayStation 3 Slim's internals.

  • Add Note x
  • x 10

Use this guide to remove the plastic top cover.

Tools
Image #1

Add Note Edit Step 1 — Top Cover  ¶ 

  • Turn the PS3 over and lay it on its backside.

  • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

  • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

Image #1 Image #2

Add Note Edit Step 2  ¶ 

  • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

Image #1

Add Note Edit Step 3  ¶ 

  • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

Image #1

Add Note Edit Step 4  ¶ 

  • Remove the three 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may have a fourth screw on the corner.)

Image #1 Image #2

Add Note Edit Step 5  ¶ 

  • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

  • Lift the top cover off the PS3.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PlayStation 3 Slim device page.

Required Tools

Phillips #1 Screwdriver

$4.95 · 5 In stock

Metal Spudger

$2.95 · 1 In stock

T8 Torx Security Bit Screwdriver

$6.95 · 39 In stock

Recommended Tools

Universal Drive Adapter

$29.95 · 50+ In stock

Inspection Scope

$39.95 · 17 In stock

Frictionless Ratchet

$24.95

Portable Anti-Static Mat

$24.95 · 10 In stock

Popular Device Products

500 GB 5400 RPM 2.5" Hard Drive

$89.95 · 6 In stock

750 GB 7200 RPM 2.5" Hard Drive

$109.95 · 17 In stock

1 TB 5400 RPM 2.5" Hard Drive

$109.95 · 10 In stock

Arctic Silver Thermal Paste

$8.95 · 50+ In stock

Arctic Silver ArctiClean

$7.95 · 50+ In stock

Comments Add Note Comments are offturn on