Installing Nintendo DSi XL Rear Bezel

Rear bezel replacement.

Be the envy of onlooking gamers with a shiny new rear bezel on your DSi XL.

Tools
Relevant Parts
Image #1 Image #2 Image #3

Add Note Edit Step 1 — Rear Bezel  ¶ 

  • Use a push pin to remove the four plastic screw covers on the front bezel.

Image #1

Add Note Edit Step 2  ¶ 

  • Remove four Phillips screws securing the front bezel to the rear bezel.

Image #1 Image #2

Add Note Edit Step 3  ¶ 

  • Using two hands, gently slide the rear bezel upwards.

  • The rear bezel will move only about 2 mm.

Image #1 Image #2

Add Note Edit Step 4  ¶ 

  • Insert a spudger into the gap between the front and rear bezel

  • Rotate the spudger away from the DSi XL, prying the two bezels apart.

Image #1

Add Note Edit Step 5  ¶ 

  • In the same manner as described above, continue prying along the top edge of the front and rear bezels.

Image #1

Add Note Edit Step 6  ¶ 

  • Separate the rear bezel from the front bezel.

  • Do not attempt to completely remove the rear bezel yet. It is still attached to the front bezel by the rear-facing camera.

Image #1

Add Note Edit Step 7  ¶ 

  • Use the flat end of a spudger to pry the rear camera off the rear bezel.

  • Remove the rear bezel.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Nintendo DSi XL device page.

Required Tools

Spudger

$2.95 · 50+ In stock

Phillips #00 Screwdriver

$4.95 · 50+ In stock

Related Products

Nintendo DSi XL Outer Shell

$34.95

Recommended Tools

Universal Drive Adapter

$29.95 · 50+ In stock

Inspection Scope

$39.95 · 17 In stock

Frictionless Ratchet

$24.95

Portable Anti-Static Mat

$24.95 · 10 In stock

Comments Add Note Comments are offturn on