Image #1

Add Note Edit Step 33 — Antenna Cover  ¶ 

  • Remove the five small Phillips screws securing the plastic antenna cover to the inside of the clutch cover.

Image #1

Add Note Edit Step 34  ¶ 

  • Pull the antenna cover off the clutch cover, being careful not to damage the antenna cables.

Image #1

Add Note Edit Step 35 — Antenna Cables  ¶ 

  • If necessary, peel the antenna leads off the adhesive securing them to the clutch cover.

Image #1

Add Note Edit Step 36  ¶ 

  • Remove the antenna cables from the clutch cover, being careful not to damage the three antenna straps.

Image #1

Add Note Edit Step 37 — Clutch Cover  ¶ 

  • Clutch cover remains.

Next » « Previous

To reassemble your device, follow these instructions in reverse order.

For more information, check out the MacBook Pro 17" Models A1151 A1212 A1229 and A1261 device page.

Required Tools

Spudger

$2.95 · 50+ In stock

T6 Torx Screwdriver

$4.95 · 50+ In stock

Phillips #00 Screwdriver

$4.95 · 50+ In stock

Related Products

MacBook Pro 17" (Model A1212) Clutch Cover

$19.95

Recommended Tools

Universal Drive Adaptor

$29.95 · 50+ In stock

iFixit Lock Pick Set

$29.95 · 14 In stock

Inspection Scope

$39.95 · 37 In stock

Frictionless Ratchet

$24.95 · 48 In stock

Portable Anti-Static Mat

$24.95 · 16 In stock

Comments Add Note Comments are offturn on