iFixit

Work your way along the top edge of the LCD, slowly prying the attached steel strip away from the front bezel.

Now that the top edge is free, slightly lift the LCD out of the front bezel for enough room to pry the steel strip along the lower edge of the LCD away from the front bezel.

Pry along the lower edge of the LCD until it is freed from the adhesive on the front bezel.

Lift the LCD out of the front bezel, minding any cables that may get caught.

Replacement Note: there are clear plastic shims attached via adhesive to the sides and bottom of the lcd panel. Be sure to transfer these shims to the replacement panel for optimum fit.

Don't forget to transfer the small magnet attached to the right side of the LCD to your new LCD. The absence of this magnet will prevent your MacBook Pro from entering sleep mode.

• Depending on the model of your laptop, the magnet may be located inside a hole in the front bezel, not the LCD itself. See second picture.