Image #1

Add Note Edit Step 57  ¶ 

  • Lift up the display data and iSight cables and move them to the side. It is not necessary to entirely remove these cables from the display assembly.

  • De-route the microphone cable from the right side of the LCD assembly.

  • On Core 2 Duo models, also de-route the antenna cable from the left side of the LCD assembly.

Image #1

Add Note Edit Step 58  ¶ 

  • Remove the three 3.1 mm Phillips screws along the left edge of the display.

Image #1

Add Note Edit Step 59  ¶ 

  • Remove the two 3.1 mm Phillips screws securing the iSight holder to the top of the display.

  • Make sure to remove the screws securing the metal bracket to the edge of the display and not the screws in the iSight board itself.

Image #1

Add Note Edit Step 60  ¶ 

  • Remove the three 3.1 mm Phillips screws along the right edge of the display.

Image #1

Add Note Edit Step 61  ¶ 

  • Lift up the LCD panel by its bottom edge and slide it out of the metal mounting brackets.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the MacBook Core 2 Duo device page.

Required Tools

Phillips #00 Screwdriver

$4.95 · 50+ In stock

Spudger

$2.95 · 50+ In stock

Phillips #00 Screwdriver

$4.95 · 50+ In stock

Coin

$2.95 · 20 In stock

Plastic Cards

$2.95 · 29 In stock

Related Products

MacBook 13.3" LCD Panel

$149.95 · 25 In stock

MacBook Display Screw Set

$19.95

Recommended Tools

Universal Drive Adaptor

$29.95 · 50+ In stock

iFixit Lock Pick Set

$29.95 · 9 In stock

Inspection Scope

$39.95 · 37 In stock

Frictionless Ratchet

$24.95 · 47 In stock

Portable Anti-Static Mat

$24.95 · 15 In stock

Comments Add Note Comments are offturn on