Introduction
This guide will help the user to locate the two contact points that attach the device's battery to the motherboard. These points will need to be unsoldered before any internal components are repaired or replaced. This will prevent accidental damage to the user or to the device from happening.
What you need
-
-
Use a soldering gun to remove the positive and negative wires connecting the battery to the motherboard.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Clemson, Team 6-3, Benson Spring 2016 Member of Clemson, Team 6-3, Benson Spring 2016
CLEM-BENSON-S16S6G3
4 Members
16 Guides authored
