Fix Your Stuff Community Store

Homedics UHE-CMP15 Wick Replacement

Introduction

If your humidifier has stopped absorbing water, you might need to replace the old wick from the humidifier with a new one. For this guide, you do not need any tools but you do need a replacement wick to place inside the lid.

  1. Homedics UHE-CMP15 Wick Replacement, Wick: step 1, image 1 of 1

    • Unscrew the top half of the device from the container and place the lid upside down.

    • The container should unscrew counter clockwise

    Edit

  2. Homedics UHE-CMP15 Wick Replacement: step 2, image 1 of 1

    • Pull the wick holder out from the bottom of the lid.

    • Grasp onto the plastic wick holder and pull upwards until it pops free.

    Edit

  4. Homedics UHE-CMP15 Wick Replacement: step 3, image 1 of 1

    • Remove the old wick from the wick holder.

    • Tilt the wick holder to the side and gently slide the wick out of its container.

    Edit

  5. Homedics UHE-CMP15 Wick Replacement: step 4, image 1 of 1

    • Place new wick into the wick holder.

    • Grab a replacement wick from the box the humidifier came in and gently slide it into the wick holder.

    Edit

  6. Homedics UHE-CMP15 Wick Replacement: step 5, image 1 of 1

    • Insert wick holder back into the lid.

    • Grab the wick holder and insert it into the lid on the end where the wick itself enters the lid and the spring side remains in the air.

    Edit
Conclusion

To reassemble your device, screw the lid back onto the container and turn it on.

Author

with 2 other contributors

Dylan

Member since: 10/30/23

337 Reputation

3 Guides authored

Badges: 5

+2 more badges

Team

UMass Dartmouth, Team 3-6, Konn Fall 2023 Member of UMass Dartmouth, Team 3-6, Konn Fall 2023

UMASSD-KONN-F23S3G6

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 97