Introduction
Replacing the battery of an HTC EXCA100 is a simple process, requiring no tools.
What you need
-
-
Power the phone off. Remove the back cover of the Phone, exposing the battery.
-
Grasp the battery by the two indents on either side of it, near the bottom. Lift up, pulling the battery loose. Remove the battery completely.
-
-
-
-
Take the new battery and orient it correctly -- the arrow should be facing towards the camera lens, face up.
-
Insert the battery at an angle, pushing the battery in until it is aligned on the top edge. Push the rest of the battery in, snapping it into place.
-
Reattach the battery cover, and power up your phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 25-27, Garner Spring 2011 Member of Cal Poly, Team 25-27, Garner Spring 2011
CPSU-GARNER-S11S25G27
4 Members
10 Guides authored
