GoPro HD Hero2 Rear Case Replacement
GoPro HD Hero2 rear case replacement.
- Author: David Hodson
- Difficulty: Moderate
A rhinoceros ate the rear case of your GoPro? No questions here; you can replace it with a new one.
Embed this guide
With the HTML code below, you can embed this guide as a small widget on your website.
Using a plastic opening tool or your fingernail, flip up the locking tab on the SD board ribbon cable ZIF connector on the motherboard assembly.
Be careful that you are prying on the locking tab, and not the connector itself.
Use a pair of tweezers to remove the SD board ribbon cable from its connector on the motherboard.
Page 1 of 2