GoPro HD Hero2 Rear Case Replacement
Please note that this guide is only a prerequisite for other guides.
GoPro HD Hero2 rear case prerequisite.
- Author: David Hodson
- Difficulty: Moderate
This guide is a prerequisite for removing the mini HDMI port or replacing the rear case.
Embed this guide
With the HTML code below, you can embed this guide as a small widget on your website.
Using a plastic opening tool or your fingernail, flip up the locking tab on the SD board ribbon cable ZIF connector on the motherboard assembly.
Be careful that you are prying on the locking tab, and not the connector itself.
Use a pair of tweezers to remove the SD board ribbon cable from its connector on the motherboard.
Comments Comments are onturn off