Page 1 of 1
Disassembling Nokia E61i Logic Board
Some of this guide's text is confusing, duplicated, or off-topic. Clarify it by editing!
An awesome member of our community made this guide. It is not managed by iFixit staff.
Missed a Step
Oops! This guide is currently missing some important steps.
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
- Author: Christopher Patton
- Time required: 15 to 20 minutes
- Difficulty: Easy
Embed this guide
With the HTML code below, you can embed this guide as a small widget on your website.
After casing and keyboard have been taken off, remove the screws holding the screen in place using a T-6 for the screws in the middle of the red circles and a T-5 for the screw in the middle of the red square.
Lift ribbon off of the contact with the logic board
*When reassembling, make sure to firmly press contacts into place to ensure a connection is made between ribbon and logic board
Once the screws are out, gently pull the screen off of the phone. *NOTICE* The sticker that attaches the display (in the middle of the blue square again) and the logic board is to be removed safely and be sure not to rip this apart.
Finally, pull the silver case off to completely free the cracked or damaged screen.
Page 1 of 1