Disassembling Macintosh IIsi Top Case

User-Contributed Guide

User-Contributed Guide

This guide is not managed by iFixit staff.

  • Author: Chris Green
  • Time required: 5 - 10 Minutes
  • Difficulty: Easy
  • Add Note x

This guide will show you how to remove the top case of the Macintosh IIsi

Tools
first image
thumb image 1
thumb image 2

Add Note Edit Step 1 — Top Case  ¶ 

  • Start by turning the computer around, and removing this screw:

  • There may or may not be a Phillips #0 screw here depending on whether or not the computer has ever been serviced.

first image
thumb image 1
thumb image 2
thumb image 3

Add Note Edit Step 2  ¶ 

  • Now lift these two clips, and slowly pivot the case up.

  • You can now seperate the top of the computer from the rest of the machine.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Macintosh IIsi device page.

Did you successfully follow this guide?

This guide has been completed 0 times.

Comments Add Note Comments are offturn on