Fix Your Stuff Community Store

Disassembling Black and Decker Pivot Plus PD600 Drill

Introduction

This guide will show you how to open your drill so that you can fix any problems that require you to open it up and possibly remove or replace parts. This guide is prerequisite only.

What you need

  1. Disassembling Black and Decker Pivot Plus PD600 Drill, Drill: step 1, image 1 of 3 Disassembling Black and Decker Pivot Plus PD600 Drill, Drill: step 1, image 2 of 3 Disassembling Black and Decker Pivot Plus PD600 Drill, Drill: step 1, image 3 of 3

    • Remove the nine 15mm Philips #1 screws

    • Remove the two 12.5mm Philips #1 screws

    • Remove the two 10mm Philips #1 screws

    Edit

  3. Disassembling Black and Decker Pivot Plus PD600 Drill: step 2, image 1 of 1

    • Lift one side of the drill casing off of the drill. Note that the drill casing consists of two pieces on either side of the drill.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Author

with 8 other contributors

Jonathon Centofranchi

Member since: 04/19/13

307 Reputation

3 Guides authored

Badges: 13

+10 more badges

Team

Cal Poly, Team 4-15, Maness Spring 2013 Member of Cal Poly, Team 4-15, Maness Spring 2013

CPSU-MANESS-S13S4G15

5 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 1,808