Installing iBook G3 14" Airport Card: Step 1 Use a coin to rotate the battery locking screw 90 degrees clockwise. Lift the battery out of the computer. /Guide/Repair/iBook-G3-14-Inch-Airport-Card/137/all#s446 Installing iBook G3 14" Airport Card: Step 2 Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free. If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again. Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area. /Guide/Repair/iBook-G3-14-Inch-Airport-Card/137/all#s447 Installing iBook G3 14" Airport Card: Step 3 If your computer does not have an Airport card installed, skip to the RAM shield removal step. Push the wire clasp toward the Airport card and pull it up to free it from the RAM shield. /Guide/Repair/iBook-G3-14-Inch-Airport-Card/137/all#s448 Installing iBook G3 14" Airport Card: Step 4 Grasp the clear plastic tab on the Airport card and pull toward the right. /Guide/Repair/iBook-G3-14-Inch-Airport-Card/137/all#s449 Installing iBook G3 14" Airport Card: Step 5 Hold the Airport card in one hand and use your other hand to remove the antenna cable. /Guide/Repair/iBook-G3-14-Inch-Airport-Card/137/all#s450