This is it. Well, this is it in a functional state. Remove the batteries before starting! /Teardown/Sky-TV-Remote/839/all#s4494 This is it. Well, this is it in a functional state. Remove the batteries before starting! /Teardown/Sky-TV-Remote/839/all#s4494 This is it. Well, this is it in a functional state. Remove the batteries before starting! /Teardown/Sky-TV-Remote/839/all#s4494 Use a Philips head screwdriver to remove this screw Use a spudger to unlock all the tabs around the sides, start at the bottom Work your way all the way around the remote, this is flippin' tricky. Brute force is compulsory. /Teardown/Sky-TV-Remote/839/all#s4499 Use a Philips head screwdriver to remove this screw Use a spudger to unlock all the tabs around the sides, start at the bottom Work your way all the way around the remote, this is flippin' tricky. Brute force is compulsory. /Teardown/Sky-TV-Remote/839/all#s4499 Use a Philips head screwdriver to remove this screw Use a spudger to unlock all the tabs around the sides, start at the bottom Work your way all the way around the remote, this is flippin' tricky. Brute force is compulsory. /Teardown/Sky-TV-Remote/839/all#s4499 After all the tabs are off, the body should just fall away leaving the buttons, the circuit board, the case and the black infra-red bit at the end. Ta-daa! /Teardown/Sky-TV-Remote/839/all#s4500 After all the tabs are off, the body should just fall away leaving the buttons, the circuit board, the case and the black infra-red bit at the end. Ta-daa! /Teardown/Sky-TV-Remote/839/all#s4500 After all the tabs are off, the body should just fall away leaving the buttons, the circuit board, the case and the black infra-red bit at the end. Ta-daa! /Teardown/Sky-TV-Remote/839/all#s4500