Installing MacBook Core 2 Duo Hard Drive Connector: Step 1 Use a coin to rotate the battery-locking screw 90 degrees clockwise. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2425 Installing MacBook Core 2 Duo Hard Drive Connector: Step 2 Lift the battery out of the computer. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2426 Installing MacBook Core 2 Duo Hard Drive Connector: Step 3 Unscrew the three evenly-spaced Phillips screws from along the rear wall of the battery compartment. The screws are captive to the metal memory cover. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2427 Installing MacBook Core 2 Duo Hard Drive Connector: Step 4 Rotate the L-shaped memory cover so it clears the battery compartment opening and lift it up and out of the computer. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2428 Installing MacBook Core 2 Duo Hard Drive Connector: Step 5 Remove the following 3 screws: One 11 mm Phillips in the middle of the case. Two 14.5 mm Phillips. If the screws stick in the case, you can use a magnetized screwdriver to draw them out. The shorter of the three screws goes in the middle. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2434 Installing MacBook Core 2 Duo Hard Drive Connector: Step 6 Remove the following 3 screws from the rear wall of the battery compartment: Two 3 mm Phillips. One 4 mm Phillips on the right side. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2435 Installing MacBook Core 2 Duo Hard Drive Connector: Step 7 Remove the two Phillips screws from either side of the right wall of the battery compartment (not the ones closest to the battery connector). /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2436 Installing MacBook Core 2 Duo Hard Drive Connector: Step 8 Remove the four indicated Phillips screws from the front wall of the battery compartment. When working from the left, remove the 2nd, 4th, 7th and 9th screw. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2437 Installing MacBook Core 2 Duo Hard Drive Connector: Step 9 Remove the following 4 screws from the back of the computer: Two 7 mm Philips on the far sides. Two 10.5 mm Phillips toward the center. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2439 Installing MacBook Core 2 Duo Hard Drive Connector: Step 10 Remove the two Phillips screws from the optical drive side of the computer. It is not necessary to remove the similar screws on the other side of the computer. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2440 Installing MacBook Core 2 Duo Hard Drive Connector: Step 11 There's a trackpad and keyboard ribbon connecting the upper case to the logic board, so don't pull the upper case off entirely just yet. Starting near the display and working around to the front of the computer, pry up on the upper case. The upper case is likely to stick at the connection above the optical drive. If this is the case first free all other sides, then proceed to pull upward on the upper case from either side of the optical drive opening. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2441 Installing MacBook Core 2 Duo Hard Drive Connector: Step 12 While holding up the upper case, pull up the black tab of the silver cable away from its connector. If there is no black tab, you can also use a spudger to gently pry the connector from its housing. This connector is tall, so be sure to pry straight up. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2442 Installing MacBook Core 2 Duo Hard Drive Connector: Step 13 Use the white plastic pull-tab to slide the hard drive to the left and out of the computer. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2478 Installing MacBook Core 2 Duo Hard Drive Connector: Step 14 Disconnect the orange optical drive ribbon cable from the logic board. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2479 Installing MacBook Core 2 Duo Hard Drive Connector: Step 15 Disconnect the newly-revealed display data cable. If there is no pull-tab on the top of the connector, it may be helpful to use a spudger to disconnect this connector. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2480 Installing MacBook Core 2 Duo Hard Drive Connector: Step 16 Disconnect the (once again) newly-revealed hard drive cable. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2481 Installing MacBook Core 2 Duo Hard Drive Connector: Step 17 Deroute the hard drive connector cable from the four tabs along the edge of the optical drive. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2482 Installing MacBook Core 2 Duo Hard Drive Connector: Step 18 Remove the two Phillips screws securing the hard drive connector to the lower case. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2483 Installing MacBook Core 2 Duo Hard Drive Connector: Step 19 Carefully lift the hard drive connector out of the case slightly, and turn it over to reveal the IR sensor connector beneath. Use a spudger to flip up the tiny bar holding the cable in place. Slide the orange IR sensor cable out of its connector, and lift the hard drive connector out of the computer. /Guide/Repair/MacBook-Core-2-Duo-Hard-Drive-Connector/523/all#s2484