Installing MacBook Pro 15" Model A1150 Hard Drive Replacement

Add Note Introduction

You can install hard drives up to 9.5mm thick.

Paginated Single Page Steps

first image

Add Note Step 1 — Battery

  • Use your fingers to push both battery release tabs away from the battery, and lift the battery out of the computer.

first image

Add Note Step 2 — Memory Door

  • Remove the three identical Phillips screws from the memory door.

first image

Add Note Step 3

  • Lift the memory door up enough to get a grip on it, and slide it toward you, pulling it away from the casing.

Add NoteNotes: Step 1

rpbetancourt's avatar
Flag Reply by rpbetancourt Mar 7 @ 11:56 AM

Before beginning, I found some small plastic bags and labeled each of the with the location the screws would come from once removed and the appropriate step number. Once the screws were removed I placed them in the labeled bags and did not have to worry about mixing screws up. Also, provided a good way to insure that no steps were skipped in the reverse process