MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 1 Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody: Seven 3 mm Phillips screws. Three 13.5 mm Phillips screws. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s11522 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 2 Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s11523 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 3 For precautionary purposes, we advise that you disconnect the battery connector from the logic board to avoid any electrical discharge. This step is optional and is not required. Use the flat end of a spudger to lift the battery connector up out of its socket on the logic board. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7329 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 4 Using the flat end of a spudger, pry the right speaker/subwoofer cable connector straight up off the logic board. Be careful not to lift the socket. Pull the connector toward the optical drive. Pry up from beneath the wires. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7337 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 5 It will be necessary to slide the small clear plastic cable retainer (boxed in red) glued to the logic board out of the way before disconnecting the camera cable. Be careful not to break any components off the board as you slide it away from the camera cable connector. Pull the camera cable connector toward the optical drive to disconnect it from the logic board. This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7338 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 6 Use the flat end of a spudger to pry the optical drive connector straight up off the logic board. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7339 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 7 Use the flat end of a spudger to pry the hard drive connector straight up off the logic board. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7340 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 8 Remove the two Phillips screws securing the subwoofer to the upper case. The longer of the two screws is on the right. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7341 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 9 The subwoofer is still connected to the right speaker, so don't completely remove it just yet. Lift the subwoofer off the optical drive, and set it above the computer. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7342 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 9 The subwoofer is still connected to the right speaker, so don't completely remove it just yet. Lift the subwoofer off the optical drive, and set it above the computer. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7342 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 10 Remove the two Phillips screws securing the camera cable bracket to the upper case. The right screw may remain captive in the camera cable. Lift the camera cable bracket out of the upper case. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7343 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 10 Remove the two Phillips screws securing the camera cable bracket to the upper case. The right screw may remain captive in the camera cable. Lift the camera cable bracket out of the upper case. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7343 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 11 Remove the three 2.5 mm Phillips screws securing the optical drive to the upper case. Lift the optical drive from its right edge and pull it out of the computer. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7344 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 11 Remove the three 2.5 mm Phillips screws securing the optical drive to the upper case. Lift the optical drive from its right edge and pull it out of the computer. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7344 MacBook Pro 13" Unibody Mid 2009 Optical Drive Replacement: Step 12 Remove the optical drive cable by pulling it straight away from the optical drive. This connector is particularly deep, so be sure to pull away from the drive at the center of the connector. If you have a CD or any other object jammed in your optical drive, we have an optical drive repair guide. /Guide/MacBook-Pro-13-Inch-Unibody-Mid-2009-Optical-Drive-Replacement/1368/all#s7478