Black and Decker CM0700BZ Power Button Replacement

Introduction

The power button may short out or break and be stuck in position. The button itself can easily be found online, and the connections are very basic and easy to remove and attach.

What you need

Step 1 Power Button

Black and Decker CM0700BZ Power Button Replacement, Power Button: step 1, image 1 of 2

Black and Decker CM0700BZ Power Button Replacement, Power Button: step 1, image 2 of 2

Ensure power cord is unplugged from the wall.
Remove the carafe holder from the bottom of the coffee machine.

Edit

Step 2

Black and Decker CM0700BZ Power Button Replacement: step 2, image 3 of 3

Place coffee maker on its side, with the bottom facing you.
Remove the two 10 mm Phillips #1 screws.
Remove one 10 mm Tri-Point Y1 screw.

Edit

Step 3

Black and Decker CM0700BZ Power Button Replacement: step 3, image 3 of 3

Slowly pry the bottom lid from the front.
You should hear a pop.
Pull up and remove the bottom lid.

Edit

Step 4

Black and Decker CM0700BZ Power Button Replacement: step 4, image 3 of 3

Using a screwdriver or spudger, firmly press on the middle of heat shrink and pull each electrical connection apart.
Gently push the power button out of the housing while pushing the tabs inwards.

Edit