2007-2011 Toyota Yaris Drip Rail Replacement (2007, 2008, 2009, 2010, 2011)

Introduction

This guide will teach the user how to replace a broken drip rail molding on a 2007-2011 Toyota Yaris Sedan. Replacing a broken drip rail on a car is important to prevent water damage to the inside of the car. This at home guide can prevent users from an expensive and long trip to the repair shop. With our guide, Toyota owners can easily fix their own drip rail from the comfort of their own home with our six easy steps.

The part numbers for the drip rail is: TOYOTA-YARIS SEDAN 07-11 LEFT ROOF DRIP MOLDING OEM 75552-52140 and TOYOTA-YARIS SEDAN 07-11 RIGHT ROOF DRIP MOLDING OEM 75551-52160.

What you need

Step 1 Drip Rail

2007-2011 Toyota Yaris Drip Rail Replacement, Drip Rail: step 1, image 1 of 3

2007-2011 Toyota Yaris Drip Rail Replacement, Drip Rail: step 1, image 2 of 3

2007-2011 Toyota Yaris Drip Rail Replacement, Drip Rail: step 1, image 3 of 3

Peel back the old molding from where it is beginning to come off until you reach the end of the rail.

Edit

Step 2

2007-2011 Toyota Yaris Drip Rail Replacement: step 2, image 3 of 3

Use a heavy duty spudger to disconnect the end of the drip rail.
It may be connected at the end pretty tightly so it could take some work to remove.
Completely remove the piece from the end.

Edit

Step 3

2007-2011 Toyota Yaris Drip Rail Replacement: step 3, image 3 of 3

Take a rag and clean out any dirt and debris that built up under the old molding.

Edit

Step 4

2007-2011 Toyota Yaris Drip Rail Replacement: step 4, image 3 of 3

Slide the end of the new piece into the designated spot and press firmly to ensure it's connected securely.
Lightly tug at it to make it is secure and won't come off.
Do the same to the opposite end of the drip rail.
The molding for the left and right drip rails are different parts.

Edit

Step 5

2007-2011 Toyota Yaris Drip Rail Replacement: step 5, image 3 of 3

Firmly press the drip rail into its place starting at one end and moving down the car.
Check to make sure the new drip rail is thoroughly sealed to the car.

Edit