Fix Your Stuff Community Store

1997-2006 Jeep Wrangler (TJ) Headlight Replacement

Introduction

With enough time, any lightbulb will burn out, and headlights are no different.

This guide demonstrates how to change a headlight in a 1997-2006 Jeep Wrangler. As opposed to many vehicles, the entire headlight assembly for this model must be replaced, not just the bulb. This guide will aid in disassembly and reassembly of the external and internal headlight bracket.

This is a straight forward process, requiring basic tools and less than an hour of your time.

Ensure that your vehicle is turned off and the emergency brake is engaged before beginning the repair.

What you need

  1. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement, Headlight: step 1, image 1 of 1

    • Unclasp and prop up the hood.

    Edit

  2. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: step 2, image 1 of 1

    • Remove the three 15.9 mm screws around the external ring casing with a Phillips #0 screwdriver.

    Edit

  3. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: step 3, image 1 of 1

    • Pull out the external ring casing.

    Edit

  4. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: step 4, image 1 of 2 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: step 4, image 2 of 2

    • Remove the four screws securing the internal ring casing with a T15 Torx screwdriver.

    Edit

  6. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: step 5, image 1 of 1

    • Disconnect the headlight assembly from the vehicle by pulling the connector directly out of the back port.

    Edit

  7. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: step 6, image 1 of 1

    • Realign the internal bracket to match the screw holes.

    Edit

  8. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: step 7, image 1 of 1

    • Reinstall the four screws securing the internal ring casing with a T15 Torx screwdriver.

    Edit

  9. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: step 8, image 1 of 1

    • Realign the external bracket to match the screw holes.

    Edit

  10. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: step 9, image 1 of 1

    • Replace the three 15.9 mm screws using a Phillips #0 screwdriver.

    Edit

  11. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: step 10, image 1 of 1

    • Close and clasp the hood back to its original position.

    Edit
Conclusion

Enjoy your bright new headlight(s)!

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 23

Past 30 Days: 90

All Time: 3,268