Page 1 of 1
by
Polanskiman Nov 19 2009 @ 9:57 PM
I have a Aluminum PowerBook G4 1.67Ghz since 2006.
3/4 (from bottom to top) of the LCD becomes either black or is jumbled each time I turn on the MAC or move the screen. I need to press the LCD at several locations in order for this problem to go.... any advice ?
reply by
lemerise Nov 19 2009 @ 10:34 PM
I would check the LVDS cable connection to the LCD panel but from what you describe it seems to be a faulty panel. Did you try to connect to an external monitor ?