Page 1 of 1

Iphone 3g Backlight not working since dissassembly - BFF

Flag Reply by Chinny Mar 15 @ 9:04 AM

Got some water in my iphone 3g. Backlight was working fine at this point. Took the phone apart to help it dry faster. After reassembly the backlight will no longer come on.

I'm not sure if there's a sensor problem or anything, but I'm somewhat out of ideas. I know the water dmg didn't do anything to the screen itself since the backlight was working fine until I dissassembled it. I'm thinking it might be a problem with the ribbon or sensor?

Any help would be appreciated

Flag Reply reply by Sarabian Mar 18 @ 8:28 AM

Normally I re-disassemble them and then put them back together again very carefully. I find that reassembly does not always go quite as planned, so am used to just redoing the take apart. It almost always works.

Flag Reply reply by eldredn Jun 9 @ 12:05 AM

Have you tried adjusting the brightness setting? The same thing happened to me (getting it wet) and when I plugged it in after reassembly the backlight wasn't working, but adjusting the brightness seemed to have jogged it into working again.

Flag Reply reply by mjtexan Jul 2 @ 12:19 PM

I dropped my Iphone in my coffee this morning...crazy I know! Everything seems to be working but the backlight went out or is very dim....any suggestions? I'm afraid to take it apart...don't know how anyway! Tell me how?

thanks

mj

Flag Reply reply by Sarabian Jul 3 @ 5:47 AM

Choose your phone and have fun. Each guide also has links to the tools mentioned in the guide. If you do not have the tools, you can get them from this site. I have bought many tools here and have never been dissatisfied, so it's safe. : )

Flag Reply reply by tinker Nov 14 @ 9:11 AM

i have the same problem, is there a fix. tried the take apart and put back together carefully, still no go, what are we missing here.

                                      Page 1 of 1

Reply to: Iphone 3g Backlight not working since dissassembly - BFF