Rep: 9
1
I have a dead A1226 and have a working A1260 screen. Can I just swap the screens and not have to take the back cover off, the bezel to just have a working MBP? Are they compatible I cannot tell by the pictures but they do have a different part number???? But the connections look the same. Thanks, Steve
Is this a good question?
Rep: 26.3k
152
71
50
Yes they have the same LVDS/video data cable, click here to verify that. They have the same inverter/iSight cable, click here to verify that. They have the same hinges, click here to verify that. Same bezel & rear display housing, click here to verify that. I could not find the lower case right off, but the same rear display housing says the hinge spacing is the same between the 2.
Yes you can do that.
Was this answer helpful?
Thanks I am taking them both apart now and will verify! Thanks a bunch. I basically did the same research but wanted to be backed up with another's verification!
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 627
1 Comment
Worked like a charm. Thanks!
by Steve