0

Score

Avatar
jmacmillan
1

Asked

Backlight only, no LCD after screen placement

History

Replaced my LCD and Digitizer and now only the backlight works. Don't think I messed up the ribbon or anything else but maybe I did. Was thinking maybe I accidentally got sent a replacement for an AT&T phone instead? Do we know if screens are compatible for both Verizon and AT&T?

Thanks in advance!

Edited by: jmacmillan ( )

i have the same problem ideas?

Jake,

Jake - You wrote a comment in the place reserved for Answers only. Please use the Add Comment link, or start a new Question of your own.

machead3,

Post Answer

0

Score

Avatar
jmacmillan
1

Answered

Accepted Answer

Permalink • History

I think I just ended up buying a really cheaply made one on ebay... Two more screens later my phone is working perfectly fine. Word of advise, don't buy the cheap screens on ebay...

0

Score

Avatar
Richdave
6.5k

Answered

Permalink • History

Check out THIS guide and recheck the connector in BLUE in step 15. IT may just need to be reseated again

HIH

Guide Image

Installing iPhone 4 Verizon Display Assembly

I tried... no luck. anything else it could be? is the AT&T screen compatible with a verizon phone?

jmacmillan,

the AT&T and Verizon screens appear to be different. Do you think you have the wrong screen? Please don't ACCEPT answer if it didn't fix problem - an ^ up-vote is always appreciated though :)

Richdave,

THIS Article may be worth reading too

Richdave,

Add Your Answer