0

Score

Avatar
samstertheclown
1

Asked

iPhone 4 Back Panel will not fit...

History

I just changed my digitilizer and my phone works but the back panel will not fit back on. I know how to put it one but it just won't fit... Please help and Thank You everyone!

Edited by: rab777hp ( )

Did you solve this because I am having same problem

Kathie,

Post Answer

0

Score

Avatar
rab777hp
13.6k

Answered

Permalink • History

Redo the repair and check that nothing is out of place. Are you sure you have an iPhone 4? On the iPhone 4 the LCD+Digitizer+glass is one unit, and is replaced as such. Also, the rear panel is a simple matter of unscrewing two screws at the bottom and rescrewing them.

Yes, it was the iPhone 4. When I put the back panell on the phone so you can slide it down it wont slide down. Thank you for your advice!

samstertheclown,

0

Score

Avatar
mapleplatypus
1

Answered

Permalink • History

After repairing my power switch on my iphone 4 I couldn't get the back panel to fit back on. Everything else was working properly, except the logic board was getting in the way of one of the clips on the back panel, and after repeated attempt to reposition the logic board the screws were beginning to get stripped, so I just removed (cut off) the one clip, and it fit back on perfectly.

0

Score

Avatar
dillon bunde
1

Answered

Permalink • History

which clip did you cut

507341 1059 with reply thx

dillon bunde,

0

Score

Avatar
scott
1

Answered

Permalink • History

Mine wont fit cause one side will go down and the other one wont. It like the battery is in the way of it.

Add Your Answer