Rep: 13
2
Yesterday i repair my MBP ( Nvidia Graphic Chip ).
Now he is running but the fans turns constantly 6000 rpm.
it may be that I forgot to connect a cable?
The temp sensors work correctly according to istate pro.
Please help me
ps. sorry for my bad english :)
Is this a good question?
Rep: 26.3k
152
71
50
You haven't given much information to go by, including the readings from iStat.
You may have a process such as a stuck print job causing your processor to run in excess. To find the process: From the terminal type top -u -s3 (to take samples every 3 seconds) and look at the output. This will give you the PID of the offending process. Write down/remember the PID. In the terminal you then enter kill -9 PID number. For example
kill -9 1111
This will kill the process 1111.
Also please tell us the process you used to reset the SMC.
Was this answer helpful?
MBP is running.I forgot the temp sensor cabel under the right fan.... Thank @ all
Rep: 32k
103
61
76
SMC reset would be a good start
THIS LINK should hekp
Was this answer helpful?
I already made smc reset.did not function
You may need to disassemble and clean your heat sinks. When they get loaded with dust and dreck your laptop will run hot. I need to do it every two years or so on mine.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 1,568
1 Comment
Please explain about repairing your Nvidia chip. Did Apple do this as a recall?
by mayer