3

Score

Avatar
joel c
47

Asked

After reassembling my PSP Go the Start & Select buttons won't work

History

After i disassembled and rereassembled my PSP Go to fix my power switch; i used the PSP Go Teardown guide from this website, and now both the Start & Select buttons won't work anymore; and they were working before then.

so i tried taking my psp go apart and putting it back together again while going over the teardown guide thinking i over looked something, anyone have an idea of what that might be?

Edited by: joel c ( )

Post Answer

3

Score

Avatar
Aram
254

Answered

Accepted Answer

Permalink • History

Look at the 2nd picture of step 9 in the PSP Go teardown. There is a cable that connects the buttons to the main board, it could be loose.

Here's a direct link to the page Aram is mentioning. http://www.ifixit.com/Teardown/PSP-Go-Te...

Ryan,

thanks man, that's exactly what the issue was, i didn't see that cable cause it was hidden by joystick's ribbon cable.

joel c,

0

Score

Avatar
Kat
1

Answered

Permalink • History

I have the same issue, except my cable is in. Any ideas? I just had sound issue which was caused by bad fuse, which i replaced and now works but SELECT/START button doesn't

Add Your Answer