Fix Your Stuff Community Store

The Nintendo DSi is the third iteration in the Nintendo DS line, and made its debut in Japan in late 2008.

262 Questions View all

Options

Had a problem when I was removing the lower lcd

I follow every single step changing the lower lcd of my nintendo, but i run into one problem. In your step #6 when you remove the three battery conections, the main battery conection, which is the small white box with the red and black wire the solder broke. Do you have the small white component or can i solder it my self. Thank you

Answer this question I have this problem too

Is this a good question?

Yes No
Score -1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Which of these two parts did you break? The tan connector on the main board, or the white connectors with the wires?

http://guide-images.ifixit.net/igi/QuRDP...

If you broke the tan connector, you will need to replace the main board; otherwise, you will need to replace the battery board. I don't think that iFixit sells these parts, check eBay.

Was this answer helpful?

Yes No
Score 1

2 Comments:

+ glad someone knows about these things ;-)

by

Thanks :) Actually, iFixit does normally sell the parts, but they are out of stock: the motherboard and the powerboard

by

Add a comment

Add your answer

Victor will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 782