a1139 power supply connector
My factory power supply is fine. POS ex wife tripped over the thing so many times the barrel-connector at the end finally wore out right at the connection. i'm on a tight budget and can solder another on if there's a replacement available (pref with wire leads in place). do you guys have any idea where to run one down? And by run one down, I mean the actual barrel-connector at the end of the power supply.....
This post is locked. No new edits are allowed.
The pin that sticks out is still intact? If so, and if you are desperate enough, you can try to fashion another one out of metal and solder it on. But otherwise you are better off buying a new one, since you don't want to risk the DC in board breaking.