Power to washer, but won't cycle.

Washer was working fine. I started a Clean Washer cycle with bleach in the dispenser and realized after I started that I wanted to remove any excess dog hair from washer drum. I tried to cancel the cycle, but it wouldn't yet me so I pressed and held the cycle signal to unlock the machine. Door opened with an INT error. I tried restart the machine and it would run. I unplugged and left unplugged for 8+ hours hoping to clear memory. When I go to start a cycle, I press start and I can hear a few clicks, but the door does not sound like it locks. After about 10 seconds of thinking, the time remaining begins to blink as well as the particular cycle light I choose. Any thoughts on how to fix?