Hey
After i switched from broken screen to a brand new, the touch on the screen won't work. The screen seems fine, but i doesn't react on touch at all...
I figured out that i have one spare part, wich i can't seem to find out, where it should be placed.
Can you help me find out what the part is for and does it have anything to do with the touch feature?
The spare part after reassemble
Is this a good question?
Rep: 37.6k
22
51
42
That's the battery ground clip goes under the battery connector..
Make sure the digitizer cable is fully seeded if it is an still no touch then it has been damaged during install..
Or was faulty to begin with
Was this answer helpful?
Ok i figured out where the part belongs, but i guess i can only try to see if the cables to the screen, are correctly installed or else the screen must be broken then...
It's the cable just to the right of the back camera.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 57
