There is no error code being displayed, and I have unplugged the washer for over an hour with no affect. By pressing 2 or 3 random buttons at the same time, the alarm will stop and the lights will turn off.
Is this a good question?
Rep: 8.5k
15
12
8
Hey Stace, I'd like you to take a look at a previous question and see if this troubleshooting step doesn't resolve the issue. If you have any further questions please feel free to ask and we will try to respond as quickly as possible.
Lights flashing, alarm sounding - while not in use
~Gadget~
Was this answer helpful?
So after leaving the machine unplugged overnight, I was able to get the alarm to stop and all the panel lights are now off. When I select one of the preprogrammed cycles now, it displays zeros instead of a preprogrammed time. I tried to do the test, but I do not have a control on button, and once I press any other button to get the panel up, after I press drain and spin, I cannot choose the spin speed to no spin as suggested. I am going to try and post a picture of my control panel to aid in a solution.
Block Image
So after leaving the machine unplugged overnight, I was able to get the alarm to stop and all the panel lights are now off. When I select one of the preprogrammed cycles now, it displays zeros instead of a preprogrammed time. I tried to do the test, but I do not have a control on button, and once I press any other button to get the panel up, after I press drain and spin, I cannot choose the spin speed to no spin as suggested. I am going to try and post a picture of my control panel to aid in a solution.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 453
