Fix Your Stuff Community Store

GSM iPad 2 with 16, 32, or 64 GB of storage, and a Dual Core A5 Processor. Model Number A1396. Repair is complicated and requires heat and prying.

152 Questions View all

Options

LCD projects the image at a very low luminosity

hello everyone,

I started repairing an iPad 2 generation digitiser, in order to take it out of it's place, I took out the LCD. When I tried to hook it back to it's place the LCD will show the home screen with really low luminosity (you can only see it with the reflex) I didn't touch anything and I payed a lot of attention in extracting the LCD. What happened? Do I have to buy a new LCD? will the problem be fixed when the digitiser will be at it's place?

Please help me,

Nicolo

Answer this question I have this problem too

Is this a good question?

Yes No
Score -1
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest

Options

If you feel confident you didn't damage anything when repairing the device I would reccomend going over cable connections again to ensure you have properly seated all cables correctly. Check the display brightness setting as well to ensure it wasn't lowered for whatever reason.

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

Also, If the ipad was not turned off during repairs (always power off devices before you open them) when the LCD is disconnected sometimes it wont function properly after reinstall. disconnect the battery for a few seconds via the cable connecting the power board to the main board. you may also try a hard reset. This has cured the same issue for me many times.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

nicolo will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 99