No power after installing unibody A1342
The keyboard was not working and I followed the instructions on how to install the unibody A1342 and now the laptop will not power on. Any suggestions?
Is this a good question?
Score
-1
166850
1 Answer
Chosen Solution
Rep: 685.3k
3.4k
1.1k
2.6k
See step 14 of this guide, sounds like the keyboard to logic board cable may not be fully seated. I sometimes use a piece of tape to help pull it into place: MacBook Unibody Model A1342 Logic Board Replacement
Was this answer helpful?
Score
1
That worked... Thanks...
