Fix Your Stuff Community Store

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Questions View all

Options

Touch screen still won't work after replacing lcd and digitize

I dropped my iphone 4 and did quite a bit of damage to the front. The screen was badly cracked but would still turn on but the digitizer wouldn't work. I have since replaced the lcd and digitizer and check many times to make sure it is connect correctly and the lcd works but the screen is not responding to any touches. I have replaced lcds and digitizers before successfully so I don't think it's a connection issue. Does anyone know what the problem might be?

Thanks in advance.

Answer this question I have this problem too

Is this a good question?

Yes No
Score -1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

If you could use a screen with a know good touch screen just to make sure you never got a faulty screen or damaged it during the install..

Had a iPhone once that no screen would work in the lcd was grand but no touch 4 screens I tryed and the screens worked ok another phone after..

I put it down to the motherboard issue

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

zaef89 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 338