Fix Your Stuff Community Store

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 Questions View all

Options

LCD flickering after digitizer replacement. Tried new LCD, still same.

The LCD had no issues when the customer brought in the ipad mini. When I replaced the digitizer, the lcd was all greyed out and 2 black lines running down the middle. I assumed it was a bad LCD so I tried a new one and the same problem persists. Could this be a board issue? If so, is there a fix?

Tried hard reset, same issue.

Original LCD http://imgur.com/tonBntl

New LCD http://imgur.com/NZk3zeS (red is to protect customors identity, not on actual lcd)

Answer this question I have this problem too

Is this a good question?

Yes No
Score -1
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest

Options

This is probably a logic board issue. What most likely happened is that a connector was damaged. You may need to replace it.

Was this answer helpful?

Yes No
Score 0

1 Comment:

Thanks, that's what we thought. We'll try apple and see what they have to say.

by

Add a comment

Options

Were you able to fix your problem? I am confronting the same issue. The screen is flickering(the image jump and jump all over the screen) Both LCD I have tested so far are broken inside, so I don't know if this flickering is caused by the broken LCD or by the connector.

Let me know, thanks!

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Robert will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,042