Skip to main content

Model A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 or 2.8 GHz Core i7 Processor

430 Questions View all

Black screen after Apple Logo, no other boot options work

I recently replaced the power supply on my IMac, and after everything was finished it finally booted up. After the apple logo had come up along with the startup chime, the screen went completely black, not even the backlight was on. I tried booting it into recovery mode, but it goes to a black screen... I tried booting from a disk with ML on it but it goes to a black screen... I tried booting to a USB but it goes to a black screen. I ran the automatic hardware tests with no errors and there was no black screen during that process. It only happens when I boot into my HD or anything else.

Any ideas?

Answered! View the answer I have this problem too

Is this a good question?

Score -1
Add a comment

1 Answer

Chosen Solution

When you boot up in Target mode (holding the letter T key) do you get the display then? If you do give SMC reset a try.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Ryan will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,068