Fix Your Stuff Community Store

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1158 Questions View all
Question Closed

Options

iPhone keep restarting after disassemble

Hi,

I had a question recently due to i need to change my side volume adjustment so i disassemble & after i assemble back my phone start up with apple logo. abt 3 to 5 mins it came out the running cycle behind the logo awhile it restart again.

i had restore with itune was sucess but after a while it repeat again of restarting.

i also did disassemble another iPhone due to changing of battery & assemble back & it same thing happen as above mention,

Is there something wrong with my assemble or is it hardware problem/some parts broken/some parts i did not install properly.

Please help.

Rgds

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

I would make sure all of the connections are properly seated. It sounds like the logic board is faulty, but it is unlikely that two logic boards were damaged in this same way, which makes me think something is not connected properly.

Was this answer helpful?

Yes No
Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,882