0
Score
MrMouse
1
Asked
iPhone 3G lcd screen burned up after digitizer change. What happened?
Hey everybody i got a little problems here with my iphone lcd screen. And im hoping that some of you could help me with this...
Before i changed digitizer to my iPhone, my lcd screen was working well. Now after digitizer change i noticed black burns in the lcd screen. When i start up the phone over half of the screen has black burns and colourful stripes and in the other side i can barely see some graphics but in negative colour. The questions are:
What did i do wrong to cause this to the lcd screen?
and
Can this be fixed with a new lcd screen?
The screen looks like this (sorry for the crappy quality):
Thank you alot!
- Heikki
1
Score
HandzUp
13
Answered
Maybe you have endommaged the LCD flex cable when you replace it on the middle bezel assembly.
1
Score
Hutchpe
45
Answered
Judging by the look of the screen the first thing I would replace would be the LCD. If that doesn't work you may have fried the mainboard but I doubt it will come to that.
1
Score
tolgar
25
Answered
you should use the iPhone 3G lcd screen which is pre-assembled like this iPhone 3GS Replacement LCD Assembly I replace it with my iPhone 3G, no any problem........
0
Score
Peter
49
Answered
Oh,sorry to see this problem!
I think your LCD display was damaged.You had better to change a new iPhone 3G lcd.Original LCD is better.
By the way,now iPhone 4 is more prevalent,why not buy a iPhone 4 or 4S.iPhone 3G is old now.
Anyway,hope you could get your new iPhone 3G ASAP.Good luck!