0
Score
Troy
1
Asked
Slide to unlock not working. Digitizer works fine.
I replaced my docking connector and now the slide unlock isn't working.
I can access the phone by swiping up on the camera then going to the gallery then using the home button.
Once I am to the home screen everything works fine and all the apps work fine.
The slide to power off button also doesn't work.
0
Score
Brad
8.4k
Answered
0
Score
Corey
1
Answered
I too have this problem. Before it was working fine but as i was trying to clean any oil on the logic board and constantly connecting and disconnecting cables to fix my service problem, i ran into this, yet another problem. i took it completely apart to try it again tomorrow. I was thinking a bad connection to one of the pins on the flex cable connector or even on the motherboards connector since i did nothing but disconnect and reconnect. i tried powering down and it too didnt work. I have not tried restoring the firmware but i doubt thats the problem.
Follow up: After playing with it for a while turns out the digitizer isn't working. Seems like a column of characters z,x,s,d,e isn't working.
Troy,