xxam93xx, download the service manual [http://www.keepandshare.com/doc/3017969/duet-aid-also-kenmore-he3-pdf-july-30-2011-8-04-pm-1-5-meg?da=y|from here]. Page 4-3 shows you how. If you are more of a visual person, check on [http://www.youtube.com/watch?v=cbxANWzEq1Y|here] and [http://www.youtube.com/watch?v=g2cFmKJZY0M&feature=relmfu|here as well.] Hope this helps, good luck.
'''UPDATE'''
Just in case the link to the manual should become disabled, here is what the manual says:
"REMOVING THE WASHER DOOR AND DOOR SWITCH
The The washer door can be removed by removing the upper left shield cover and hinge cover. Open the door and remove three screws securing the door door hinge to the washer front and lifting upward.Access to the door switch requires that the water seal boot be removed from the front of the washer.Use a flat bladed screwdriver at the location of the retainer spring and pull the retainer forward and then off the perimeter of the boot.Ease the edge of the boot off of the lip of the washer washer front near the door switch.Remove enough of the boot to gain access to the door switch behind the washer front panel.The door switch is secured to the washer front panel with three screws. Once these screws are removed, the door switch will remain in place until it is lifted slightly and pulled back from the washer front panel." ThatThis way the answer will not become useless as "great many of"my"answers are useless without usable links to the material" I " provide" Hope this helps.
The The washer door can be removed by removing the upper left shield cover and hinge cover. Open the door and remove three screws securing the door door hinge to the washer front and lifting upward.Access to the door switch requires that the water seal boot be removed from the front of the washer.Use a flat bladed screwdriver at the location of the retainer spring and pull the retainer forward and then off the perimeter of the boot.Ease the edge of the boot off of the lip of the washer washer front near the door switch.Remove enough of the boot to gain access to the door switch behind the washer front panel.The door switch is secured to the washer front panel with three screws. Once these screws are removed, the door switch will remain in place until it is lifted slightly and pulled back from the washer front panel." ThatThis way the answer will not become useless as "great many of"my"answers are useless without usable links to the material" I " provide" Hope this helps.
xxam93xx, download the service manual [http://www.keepandshare.com/doc/3017969/duet-aid-also-kenmore-he3-pdf-july-30-2011-8-04-pm-1-5-meg?da=y|from here]. Page 4-3 shows you how. If you are more of a visual person, check on [http://www.youtube.com/watch?v=cbxANWzEq1Y|here] and [http://www.youtube.com/watch?v=g2cFmKJZY0M&feature=relmfu|here as well.] Hope this helps, good luck.
'''UPDATE'''
Just in case the link to the manual should become disabled, here is what the manual says:
"REMOVING THE WASHER DOOR AND DOOR SWITCH
The washer door can be removed by removing the upper left shield cover and hinge cover. Open the door and remove three screws securing the
door hinge to the washer front and lifting upward.Access to the door switch requires that the water seal boot be removed from the front of the washer.Use a flat bladed screwdriver at the location of the retainer spring and pull the retainer forward and then off the perimeter of the boot.Ease the edge of the boot off of the lip of the
washer front near the door switch.Remove enough of the boot to gain access to the door switch behind the washer front panel.The door switch is secured to the washer front panel with three screws. Once these screws are removed, the door switch will remain in place until it is lifted slightly and pulled back from the washer front panel." That way the answer will not become useless as "great many of"my"answers are useless without usable links to the material" I " provide" Hope this helps.
xxam93xx, download the service manual [http://www.keepandshare.com/doc/3017969/duet-aid-also-kenmore-he3-pdf-july-30-2011-8-04-pm-1-5-meg?da=y|from here]. Page 4-3 shows you how. If you are more of a visual person, check on [http://www.youtube.com/watch?v=cbxANWzEq1Y|here], there are a couple of them.http://www.youtube.com/watch?v=cbxANWzEq1Y|here] and [http://www.youtube.com/watch?v=g2cFmKJZY0M&feature=relmfu|here as well.] Hope this helps, good luck.
xxam93xx, download the service manual [http://www.keepandshare.com/doc/3017969/duet-aid-also-kenmore-he3-pdf-july-30-2011-8-04-pm-1-5-meg?da=y|from here]. Page 4-3 shows you how. If you are more of a visual person, check on [http://www.youtube.com/watch?v=cbxANWzEq1Y|here], there are a couple of them.http://www.youtube.com/watch?v=cbxANWzEq1Y|here] and [http://www.youtube.com/watch?v=g2cFmKJZY0M&feature=relmfu|here as well.] Hope this helps, good luck.
xxam93xx, download the service manual [http://www.keepandshare.com/doc/3017969/duet-aid-also-kenmore-he3-pdf-july-30-2011-8-04-pm-1-5-meg?da=y|from here]. Page 4-3 shows you how. If you are more of a visual person, check on [http://www.youtube.com/watch?v=cbxANWzEq1Y|here], there are a couple of them. Hope this helps, good luck.
